NEED PICTURE OF SERPENTINE BELT 2000 XJ8

Here's a link to your belt,put wrench on bolt a tensioner,turn to take tension off,then remove belt,need 2 people to do this. 2000 Volkswagen Passat Serpentine Belt Routing and Timing Belt Diagrams

Go to google search and type in 2000 Windstar serpentine belt diagram.

The 2000 Jaguar S-Type 3.0L 6-cylinder engine uses a timing chain. Here is a picture: http://www.carpartsdiscount.com/auto/parts/2000/jaguar/s_type/timing_belts_chains_covers/genuine_timing_chain.html?3593=102084

I’m happy to help further over the phone at https://www.6ya.com/expert/jeremy_69f3cc28d95bf514

SOME MODELS HAVE A PICTURE OF THE SERPENTINE BELT LOCATED UNDER THE HOOD ON THE FRONT CROSSMEMBER OF THE CAR.

VERY EASY, BACK UP THE TENSIONER AND REMOVE BELT. INSTALL THE SAME WAY YOU REMOVE IT, MAKE SURE YOU REMEMBER HOW IT GOES........ DRAW A PICTURE IF YOU NEED

Not bad to do, first check and make sure the routing belt label is there before you remove belt should be a label under the hood or on radiator support, if not draw a picture so it goes on the same way. To remove belt on center of tensioner pulley there's a bolt fit a wrench and turn clockwise to release tension remove belt while holding tension.

Click on the following free direct Link.
It has the correct Belt Diagram for your 2000 Ford Escort ZX2.

Let me know if this helped, or if you have additional information questions. Feel Free to contact me at FixYa.com!

http://www.2carpros.com/car_repair_information/year/2000/make/ford/model/zx2/2000_ford_zx2_drive_belt_routing_diagram.htm

Not sure of your engine size since you didn't post it so please the applicable one for you. Also, please don't forget to rate! Thanks!


Serpentine drive belt routing with A/C-GM 2.2L engine


Serpentine drive belt routing without A/C-GM 2.2L engine


Serpentine drive belt routing-GM 2.4L engine

You should be able to see the diagram for the serpentine belt when you open the hood.

Here is a link to a picture of a 2002. Hope it's the same.

Serpentine Diagram