Question about Lincoln Town Car

3 Answers

98 town car my brake lights both turn signals work my hazards work, but my running tail lights don't work

Posted by on

Ad

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

  • Contributor
  • 3 Answers

Check to make sure that the bulbs are not blown, It is possible that both could be blown. The turn signal and brakes lamps usally work on the same circut. Check fuses 31, 1,3,5,7 also.

Posted on May 05, 2013

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 118 Answers

Hello,

Inside your instrument fuse panel look for fuse #31 which powers up the light control module and the main light switch, also while there be sure and check fuses 1, 3, 5, 7, and 9 to be sure they're not blown.

Good luck!

Let me know if this helps.

Rodney

Posted on Jun 14, 2011

  • Leo Parcutilo May 12, 2013

    thanks for you info it helps

×

Ad
  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 4 Answers

Sir wher is the control module of instumental panel ican t look wher is iam leo this my email add leoparcutilo@yahoo.com

Posted on May 04, 2013

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Turn signals not working


Suspect the multi-function switch. (turnsignal) these fail a lot.

Jan 01, 2018 | Ford E-150 Cars & Trucks

1 Answer

1991 Park avenue, Tail lights and license's plate light's stopped working turn signal's hazards and brake lights still functional. but no tail lights or license plate lights


Check for Power on your License Plate Light, more than likely you have lost GROUND

Turn Signals, Do the Front Work and the Back don't? If NONE then FLASHER FUSE

Apr 09, 2013 | 1991 Buick Park Avenue

5 Answers

98 chevy lumina Rear window break light works, but rear break lights don't, also right turn don't work?


I can almost 100% guaranty the turn signal switch is the problem. Power for the brake lights starts at the brake switch. power then splits from there and the third brake light gets power directly from the brake switch. Since the turn signal and the brake lights are on the same bulb power for the brake lights is routed through the turn signal switch. the switch depending on what position it is in will allow brake power or turn signal power to there respective left or right brake/turn bulbs.

If you hold your foot on the brake pedal and wiggle the turn signal and or play with the hazard switch the brake lights will almost always intermittently start to work. this will confirm a bad turn signal switch which is pretty common on GM vehicle with this style setup.

I’m happy to assist further over the phone at https://www.6ya.com/expert/jeremy_d728a59f986299fa

Apr 05, 2013 | 1998 Chevrolet Lumina

1 Answer

1994 Pontiac Grand am Tailights all work normaly except when the headlights are on and then they don't work at all?


Could be the headlight switch.
The switch has two sets of contacts for the parking lights, the park position and headlight position.
You may need to check the circuit at the switch to see if you are loosing power when the switch is moved from park to head.

Dec 23, 2012 | 1994 Pontiac Grand Am

1 Answer

My dashboard and rear lights don't work


Assuming this has the V6, the 15A PARK LPS fuse in the underhood fuse block feeds constant power to the auto park lamp relay. When the relay closes, 12V power passes through the 10A INST LPS fuse in the right instrument panel fuse block to the panel dimmer switch and then to the five instrument cluster lamps.

If by "rear lights" you mean everything in the rear lamp assemblies, power for the tail lights (running lights) starts at the 15A PARKLAMP fuse in the underhood junction block, passes through the automatic lamp control (ALC) relay and the right instrument panel junction block to the tail filament of the dual stop/tail lamp and the separate tail lamp on each side. The 12 V power for the stop lamps is protected by the 20A STOPLAMPS fuse in the left I/P junction block, passes through the stoplamp switch when brakes are applied, stop filament of the dual stop/tail lamps. That leaves the turn signals and the hazard lamps. Power for the turn signals originates at the 10A TURNLAMPS fuse in the left I/P junction block and is applied to the hazard switch. Switch output goes to the turn/headlamp/wiper switch for selection of left or right turn signals. That switch output goes to the turn lamp. Power for the hazard function begins at the 10A HAZRD LPS fuse in the left I/P junction box and goes to the hazard switch. Switch output is sent to the left I/P junction box to make the turn signals flash. That's it. Post a comment if you need more information.

Sep 15, 2012 | 2002 Oldsmobile Alero

1 Answer

Turn signal lights don't work even though hazards do


Sound like a flasher device go to bad; check in fuse box and replace it to solve this problem.

Jun 11, 2012 | 2006 Chrysler Town & Country

1 Answer

No turn signals,brake lights. have tails lights. all fuses in fuse box under check out ok


The turn signals and the brake lights go through the hazard switch. Try cycling it a few times and see if that solves the problem. If the fuses are good and the 4way's don't work, I would suspect that switch.

Sep 21, 2011 | 1994 GMC Suburban

1 Answer

Rear brake lights and turning signals not working. One tail light has been out for very long time, but brake lights and signals just stopped working few weeks ago.


I'm checking into that same problem for a early 90's buick ( it's a GM also ) , I've checked the obvious ( bulbs, flasher,fuses,etc) all where fine. I assume your front turn signals work if you manually operate the turn signal switch or put on the hazard switch? The Buick's rear lights won't come on even with the hazard switch on. When you say one tail light has been out for some time, do you mean the brake/signal light or park/running lights? The Buick was like that with one side out for a while ( brake/signal light) but both the rear park/running lights work. Now, I've narrowed the problem down to the turn signal switch. I'd bet money on it. I just have to dig out my steering wheel puller, bite the bullet and get 'er done. You should be carefull if you're attempting that repair yourself ( AIRBAG ), use a manual. ( You could do a quick test by trying the turn signal while you pull the bottom of the arm toward you,move some of the wiring in the column near the arm,etc. I did and the signals started working. Could be the switch,dirt or a broken/loose wire. there's a lot of wiring going through the column and a lot of movement ( turn signal,high beam,cruise, then add tilt) Hope this helped.

Sep 20, 2011 | 2001 Chevrolet Cavalier

1 Answer

Tail lights stopped working (keeps blowing fuse)


you could either have a front marker/signal lamp w/lamp grounded and causing this,remember...when tail lights are on so are your frt parking/marker lights on also..... other than that you could have a feed wire worn thru and grounding out to the frame

Sep 13, 2009 | 1994 Lincoln Town Car

1 Answer

Left side brake and hazard lights don"t work


sounds like a bad turn signal switch, wiggle it , just a little bit,... see if some of the lights start to work. do your turn lights work correctly??

Dec 02, 2008 | 2000 Chevrolet Lumina

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

226 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lincoln Experts

Marvin
Marvin

Level 3 Expert

85160 Answers

gerry bissi

Level 3 Expert

4387 Answers

fordexpert

Level 3 Expert

5692 Answers

Are you a Lincoln Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...