I need a owners manuel fora 2004 gmc canyon - 2004 GMC Canyon

Gmc canyon no hot wire at my switch 2004 ????? What switch ? Heard that I should even have a constant not there also ??? You need to give some better info.

There isn't one. There's two fuses for the turn signals. The flashing is controlled by the Body Control Module.

http://www.stockwiseauto.com/product_info.php/products_id/324058/fit_id/11132/Year/2004/Make/GMC/Model/Canyon?gclid=CJGg7sPHhsMCFRRcfgod5gsA9g
you can find it at almost any auto parts store just to give u an idea. Right side kicker panel. Good luck.

Park the Canyon on a flat stretch of road or driveway and open the hood.

2 Remove the master cylinder cap located near the firewall on the right side of the GMC's engine. Remove half of the brake fluid in the reservoir with a turkey baster. Lay the cap over the container.

Read more: How to Change Rotors on a 2005 GMC Canyon ' eHow.com http://www.ehow.com/how_6717490_change-rotors-gmc-canyan.html#ixzz29JfCwiDq

radio receiver going bad, will need to have gm dealer remove and install replacement radio, radio has to be programmed by gm dealer

All fuses and circuit breakers for a 2005 GMC Canyon are located in the engine compartment fuse block.

This subject is covered in the 2005 GMC Canyon Owner's Manual on pages 5-98 through 5-102.

If you do not have an Owner's Manual, you can download a free PDF version clicking on the following direct link:

2005 GMC Canyon Owner's Manual

powe windows do not work

It may be true that the dealer told him that, however I doubt the truck rolled off the assembly line like that. I also doubt GM put that light there for no reason. There is a reason it came on and if it was me I would want to know.

There is a plug up under the glove box that loosens and you need to snug it up.

It has to be for the 2004 Canyon.

the only way to reprogram a key fob is to go to the dealer