Question about 2007 Chrysler Pacifica FWD New Cars

2 Answers

My left directional(blinker) is flashing quickly. The front light is not flashing; the rear light is flashing at the same quick rate as the interior indicator. What fuse is for the left (driver side) directional?

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chrysler Master
  • 14,092 Answers

IF LEFT FRONT BLINKER NOT WORKING FRONT TURN SIGNAL BULB BURNED OUT.

Posted on Jun 06, 2011

  • bhampton238 Jun 08, 2011

    we had the same problem but our bulb was loose, but it is definitely easy to fix

×

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Chrysler Master
  • 2,907 Answers

Check all four of the turn signal lights. Usually one of the bulbs is bad. Sometimes is lit but not flashing, sometimes it is off. Replace that bulb.
Hope this helps.

Posted on Apr 16, 2015

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My left blinker is the only blinker that flashes fast. it still works but is very quick blinking. what fuse do i replace?


check other turn signal bulbs on the same side of car. If there ws a fuse problem he flashers would not work Fuses only protect wirreing and do not cause problems

Aug 02, 2018 | Cars & Trucks

1 Answer

How do I fix the problem with the rear left side indicator blinks really quickly when I press the brake pedal and then the brake light also starts to blink quickly as well. I hope you can help? ?


Your bulb might be burnt since most bulbs that are use for brake light and blinker are also used for lighting the same rear position light. But have you checked the front blinker when this happens? Some cars will act this way when a bulb is burnt. Good luck

Apr 12, 2016 | Cars & Trucks

1 Answer

Interior dash blinker


dash, blink alert dead. sure its bad. the feed is good.
the FSM covers this, some are easy other much harder.
i think alldata.com has this covered.
login and read it.

Jan 07, 2014 | Toyota Tacoma Cars & Trucks

2 Answers

My left front blinker flashes quickly. - The left


Check for power at the socket. If there is no power I would suspect the flasher relay wich supplies power to each bulb individually after it gets the right or left signal from the switch.

I’m happy to assist further over the phone at https://www.6ya.com/expert/jeremy_d728a59f986299fa

Sep 08, 2013 | 2007 Toyota 4Runner

1 Answer

I have a 97 Grand Cherokee. My left turn blinker flashes quickly in the rear and not at all in the front. It appears the left front bulb is burnt out. How do i replace it?


Directly from the Repair Manual...

12_24_2012_2_46_52_pm.gif

12_24_2012_2_47_38_pm.gif

112_24_2012_2_48_40_pm.gif


I could send a email to you with this Section 806kb on PDF file; keep in touch and tell me where.

Good luck.

Dec 23, 2012 | 1997 Jeep Grand Cherokee

2 Answers

Left turn signal flashes fast but all four will flash. left front is dim.


You need to replace the left front light. The quick flashing is like your check engine light for your blinkers. Once you replace it everything will go back to normal

Nov 28, 2012 | 2004 Honda Accord

1 Answer

Rear turn signal and hazard light don't flash (left side only)


The rear left turn signal bulb must be replaced immediatly before it melts the light socket, if it has'nt yet. Also please verify that the correct light bulb is being installed. because even though many bulbs look the same they are not identical. Installing the wrong bulb can be the begining of many, many problems in the particular circuit

Mar 26, 2010 | 2000 Ford Focus

1 Answer

Brake light and flasher


check and test the socket ( pig tail ) that the lite plus int for power when the flasher is on. If there is power to it try a different bulb, if there is no power then you will need to trace the wiring circuit back towards the fuse box testing for power at all junctions. Good luck, and remember to rate all solutions you get. Thanx

Oct 28, 2008 | 1998 Chevrolet K1500

2 Answers

Chevy venture blinker


turn the turn signal on and then just get out of the van and look at the front one and then the back one

Oct 27, 2008 | 2003 Chevrolet Venture Passanger

Not finding what you are looking for?
2007 Chrysler Pacifica FWD New Cars Logo

689 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

Marvin
Marvin

Level 3 Expert

85160 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...