Im trying to replace my factory car radio in my 98 oldsmobile cutlass and i cant get the wiring correct. how should i go about this? i need to find the correct radio wiring diagram. wat r ur tips on how to make sure its hooked up properly?

https://www.the12volt.com/installbay/stereodetail/845.html

you may need new speakers or there are wires not hooked up right

If you tightened the rockers too far, the valves are probably leaking.

my manual says it's in or under the glove box...

http://www.modifiedlife.com/1996-oldsmobile-cutlass-ciera-car-stereo-wire-schematic/

I provide wiring diagrams on a private website for a fee, let me know if you're interested

did you have sound with old radio before ? did you use a wiring harnest ? check speaker wires or if you have the factory bose or concert sound system the factory amp probably went bad therefor you would have to run speaker wire from each speaker to correct the problem .

reach me @ facebook Bret Hatfield

Its located on the fuel rail assembly, under the hood near the throttle body.

go to installer.com

When you say tried different radio and it didn't work, does this mean the tuner acts like it is functioning, but you hear nothing out of the speakers?

If so, this stinks of a bad ANTENNA...