How to instal valv lifters
Pull intake off pull off valve covers,loosin rocker arm bolts and remove ,, pull push rods out, after you have the push rods out you can pull the lifters out,,,,,,i suggest taking to a mechanic shop,,, if all you have is a ticking sound try this,,, buy a can of chemtol spray,,,chemtol only,,, with the little red straw for spraying,,,remove valve cover,,try to see if you can hear which lift or lifts is ticking,,,turn off car,,,loosen not remove that rocker arm,,,slid to the side,,count your turns,,,move rocker to the side,,, take chemtol spray and insert little spray straw and spray it down the hole in the center of the push rod ,, it will clean the lifter of the debris that is not letting it prime up,, repeat if nessary,, it works,,, see YOU TUBE,,, dirty oil causes this,,, put in clean oil and some lucas oil treatment to help prevent in future,,, keep oil changed ,,if it starts ticking again change oil and add more lucas,,, it might fix itself
I have a 2000 Jeep Cherokee with 125,000 miles. This morning there was a load knocking, the same pace as a heart beat coming from the engine. What is it?
seems to have good oil pressure But when u step on gas it gets very noisy on top end Not a knock but tap tap noise
×