Question about 1991 Mazda B-Series
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: mazda 2003 MPV door locks
I just fixed this same problem. It happened to me 3 different times in
a month so I got good at it. Before you dive into removing your door
try this. Pull the door handle and release it letting it snap back
several times. The problem is a half open door latch that won't let the
door unlock. Do this as aggressively as you can to attempt to get the
latch to return to its original position. Check the door lock between
Ok, if that didn't work, here is how to remove the door.
1. Remove the screw behind the door latch, you will have to pop the plastic cover off first.
2. Remove the rubber insert in the door handle
3. Remove the screw that is now visible
4. Now remove the window/lock control module, the back is free but the front has a plastic lip so lift the back up and pull towards the back of the van.
5. Remove the clips that attach to the lock and to the window controls (these can be a pain)
5. (Optional) Remove the bracket that held the window/lock control module
At this point your door is basically free, it is only held in place with plastic clips that can be easily forced off. If your door were open you would simple pull the bottom of the door out (hinged at the window) and lift it off. But since we can't pull because the door is closed we have to force it out.
From here it is pretty simple. Move the seat all the way back and tip the seat way back. Lift the door panel straight up. You will be breaking 2 plastic clips from the rear part but once you do it just pulls out. This is not that easy because the space is limited but just keep pulling and force the rear end of the door panel past the b-pillar. Once you do this it is free.
Have fun and try to keep the black gook from getting everywhere.
Oh, to fix the door lock just oil/grease it and manually move the mechanism several times.
Posted on Nov 11, 2008
thei are screws in the door hidden by caps that you need to take off the door and near the mirror shoud pop off
Posted on Jan 24, 2009
this ones trick but ive done it. you have to carfully pry back the top part of the door panel and you should get enogh room for a small arm to fit in and manuall pull up on the relese lever for the latch to the door then you can take the door apart for inspection
Posted on Mar 20, 2009
SOURCE: Mazda B2600i
are there any fault codes present? i was looking at the fuel injection diagram on autozone.com and the only thing i can see that controls injector pulse width is the pcm. are all the injectors open for 15ms? you should also check fuel pressure. if you want to look at the diagram, go to autozone.com. register and enter you car. select repair guides, chassis electrical and the wiring diagrams
Posted on Mar 30, 2010
SOURCE: 1991 Mazda B2600i power steering
These sounds like the copper washer underneath the hose needs replacing or you just need to tighten the nut on the hose, check the washer and try to tighten it.
Hope this helps.
Posted on Jan 06, 2011
Tips for a great answer:
May 03, 2015 | 1991 Mazda B-Series
Jan 04, 2015 | 2008 Mazda 3
Sep 14, 2013 | Cars & Trucks
Feb 21, 2012 | 1990 Mazda B-Series
Jun 16, 2011 | Mazda 323 Cars & Trucks
Apr 01, 2011 | 2002 Mazda MPV
Nov 02, 2010 | 1991 Mazda B-Series
Apr 20, 2010 | 1991 Mazda B-Series
Dec 11, 2009 | 1991 Nissan Maxima
Apr 29, 2017 | 1991 Mazda B-Series
241 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: