Firing order is 1-6-5-4-3-2... the driver side is 1 3 5 and the passenger side is 2 4 6
Hi,
Operation:
The offsets on an engines crankshaft
are designed so that the power stroke
of one piston forces the next piston in
the firing order up on its compression
stroke. The firing order is derived
from the design of the crankshaft and
is critical to smooth engine operation
If an ignition wire is hooked up to the
wrong plug, there is at least one other
plug that is wrong too. This is
referred to as crossed wires.
Advice:
The best way to ensure that your firing
order is correct is to replace the
spark plug wires one at a time. Start
with the longest wire, and work your
way one by one down to the shortest
wire. If in doubt, the repair guides
are a good source for information on
the firing order and ignition wire-set
routing.
,The firing order on all four cylinder S10's is 1,3,4,2,
1999 Chevrolet S10/T10 Blazer 4WD
4.3 liter V-6 VIN "W"
All the best,
Ben
885 views
Usually answered in minutes!
×