-
Expert
100 Answers
- Posted on May 25, 2011
Re: The SRS light will go off. Tell how to turn it off.
Hi, you cannot turn it off rather you have to reset it by following the instruction below...
- Turn ignition switch off, remove service connector cover.
- Connect (jump) the MES (Memory Erase Signal) connector (this is 2 pin connector wrapped on yellow plugged in the front of the under dash fuse box).
- Turn ignition switch on.
- SRS light will come on for 6 secs then go out, remove the jumper within 4 secs after the light goes out..
- The SRS light will come on again, reconnect the jumper within 4 secs after the light has come on.
- The SRS light will go off, remove the jumper with in 4 secs after the light has gone off.
- The SRS light will blink 2 times indicating the memory is reset.
- Turn the ignition switch to off and wait for 10 seconds.
×