At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Sorry about that - the picture did not paste for some reason. One mine it was located in the following position: Looking at the front of the engine it was on the right-hand side upper part of the block. Should have a single wire connected to it.Sorry about that - the picture did not paste for some reason. One mine it was located in the following position: Looking at the front of the engine it was on the right-hand side upper part of the block. Should have a single wire connected to it.
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
My online Sonata manual shows these possibilities, but does not identify which applies specifically to 2000 Sonata. Also, when you talk to the dealership parts counter, you'll need to know whether your 2000 Sonata is (a) 4-cylinder 2.4L MFI DOHC engine, or (b) 6-cylinder 2.5L MFI DOHC engine. Its easy to tell - just count your spark plug wires.
-- begine excerpt from 2000 Hyundai Sonata Repair guide --
The crankshaft position sensor is located next to the flywheel. The crankshaft position sensor is located next to the flywheel/torque converter. The camshaft position sensor is located on the engine near the timing belt cover and under the upper radiator hose. The crankshaft position sensor is located on the driver-s side of the vehicle, down by the lower radiator hose. The crankshaft position sensor is located on the engine near the crankshaft pulley. The crankshaft position sensor is located at the front of the engine near the timing belt.
--- end excerpt from 2000 Hyundai Sonata repai guide ---
hi, i have attached the image, showing the position of crankshaft position sensor.hope its helpful for you. Please rate my solution as helpful.have a great day.
The sensor is located on the left hand rear side of the block (near the bell housing). It is held in place by a 10mm bolt. It's to the right of the exhaust manifold (LH - radiator side) on the V6. Once you purchase the new sensor you'll be able to identify it on the engine. The connector to this sensor is located in the illustration.
A word to the wise... replace the O2 snsr as well.
The crankshaft sensor determines when to fire the plugs; if it has failed, no plugs will fire.
If you have no mechanic friends who know how to test this sensor, you should probably invest in an aftermarket service manual.
They have simple tests for most sensors and conditions that don't require costly equipment or detailed knowledge.
I prefer Haynes and they are available on line here:
Haynes Sonata Manual
You may also find them elsewhere for a few dollars less.
×