At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Hi, both headlights on the passenger side of my fiat punto have gone. I have replaced the fuses but it hasnt worked. Is it likely to be the bulbs or something else?
Cheers
Lee
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I would check the wiring harness leading to the lights first and then the bulbs next. Not likely that they are on the same fuse but does not hurt to check. An electrical surge could do this as well but again not the likely cause.
check the condition of the fuse there are fuses one for left and one for right side they are independant as if one light goes you dont want both going while driving. the fuse may look good but it probably is not a a hair line crack will stop power from going to the light.
On the front Passenger site if I am correct, if you open the door on the side of the dashboard should be a little flap that you can open. There is the fusebox with the Cigarette Lighter Fuse. If I am wrong it should else be located on the right side under the steering wheel.
you might need tio check the grounding of course it is possible damage or try to check the fuse it is located to your front pannel board. and the connect from the main source for the supply
On the inside trim, you can remove screws that are by the door handle,
arm rest, under door and side of door and then gently pull back on the
panel as there will also be retaining clips attached and you don't want
to break them. You'll need to lift the door panel upwards in order to
get it off the window ledge. Then you'll need to manipulate the panel
and disconnect the door handle linkage from the door handle and
disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door
×