SOURCE: Clutch replacement details for 1996 legacy GTB
Trust me it is quite an excercise and not worth doing yourself. With the proper tools, a hoist and a my mate who is a Guru Subaru Mech it took 4 hours. Without having done it before and without the Hoist ( which is wha I was going to do initially ) I'd say you wouldn't get much change out of 8 - 12 hours.
SOURCE: Subaru Legacy Problem:
Can't gaurantee it but the catalytic converter would be 1 thing to check. Had the same problem on a mondeo 3500rpm max and gutless as, I found the cat had fallen to bits and blocked the exhuast pipe loads of back pressure etc. hope this helps.
SOURCE: a/t light is flashing 16 times n 1995 subaru legacy
if by a/t you mean automatic transmission try a power purge transmission service it may have a filter sensor that is telling you to service soon
SOURCE: wont pass nys emission inspection. check engine
Have the computer scanned (see my tips and tricks section for a free way to do so - click my screenname and go to Tips and Tricks). There are either latent codes (codes which are set but are not tripping a check-engine light) or you have an issue with a readiness code.
Once the codes are scanned, post them here as a reply/comment and I can work with you on solving the issue.
202 views
Usually answered in minutes!
×