Access to the tail light cluster should be through panels in the rear corners of the vehicle. Remove the panel and you can remove the tail light cluster to replace the bulbs. This is the position on most sedans, unless, like on pick-ups, the tail light lenses have screws which allow the lenses to be removed to change the bulbs.
SOURCE: How do I change the 3rd brake light on a 2004
the light housing will either be clipped in and you will need to gently pry on the housing to open it, or you will be able to unscrew the housing through the trunk itself
SOURCE: High Level Brake bulb replacement
If memory serves, there are two screws holding this light assy to the rear package deck. They are covered (LH and RH side of this assy). remove the covers and using a phillips screwdriver, remove the screws and lift the assy up and away from the rear glass. you now have access to the bulb and socket.
2,450 views
Usually answered in minutes!
×