Most leaks that are found by the header you most likely have a valve cover leak and that is common
they are easy to change just a few 7/16 bolts the best thing to do is when you get it off clean the
motor and valve cover very well from the old gasket the new gasket will come with two so you
might as well do both sides while you have the valve cover off paint it light blue this way you can
detect any leaks quick and use (PERMATEX BLUE) it works very well with oil and don't tighten
the bolts very tight a little more than hand tight will do
hope this helps you
good luck
bob
113 views
Usually answered in minutes!
×