SOURCE: Nissan Maxima QX 1995cc 1999 - Engine hesitation and sometimes cutting out - intermittant problem
what do you mean by hunting?
SOURCE: cant set timing on 1991 nissan maxima
The marks are for an initial reference only. Once the belt is correctly in place and proper tension set, the cam is in time with the crankshaft and will stay that way until the belt breaks or slips from one cog to the next (won't happen if the tension is correct).
After the belt is initially set with the marks lined up, two rotations of the crankshaft (one rotation of the camshaft) will have the marks in a different place. The only exception would be if the belt had an exact multiple of ribs/teeth compared to the crankshaft, and that is not very likely.
SOURCE: timimg for a 1990 nissan maxima
If your belt came with marks, then they should match the marks that are on the sprockets and block, if not, you must have the cam marks align with those on the engine. If you're in doubt about the exact spot, lay a tooth pick across the sprockets so that you can check alignment to the block.
SOURCE: How to remove the radio - 1996 Nissan Maxima QX cd/c assette play
If the unit has 4 small holes on the face, get a wire hanger and insert into all 4 holes at once, releasing the retaining clips.
If unit does not have 4 holes on face, remove dash panel around stereo. This can be done by simply pulling the panel off, as it is only held on with "pop in" clips. The unit will be hard fastened to the car with screws and brackets that are easily accessable and will be visible when the dash panel is removed.
104 views
Usually answered in minutes!
×