Regards,
Tony
You turn the nut to the RIGHT to loosen the bolt. There is no secret. The strap wrench holds the fan steady while you loosen the bolt. The bolt will come loose easy but the fan you will have to work at to get out. Why did you low rate me? I gave you the correct answer.
I just changed mine and the thread is right hand. You turn it to the left to loosn it!!
×
I'm pretty sure the is gona make it tougher on you. It probably comes off right thread. Meaning loosening to the right. While it was still in the van you had the belt to hold the pulley, then you would use the right wrench & tap it to the right. It acts like an impact tool & the clutch comes right off. Now you need to hold the pulley without damaging it or reinstall the pump & belt to do what I said.
4,484 views
Usually answered in minutes!
it seem to be frozen on it is original part. I try to remove it while it was on truck and now I have removed water pump from truck working with strap wrench and 36mm wrench need to know if there are other options.
I clampeda vice grip wrench on the pulley nd let it catch on the waterpump housing to allow nut to break loose.
×