Re: Chevy 1996 s10 wont start it turns but that's it we...
Test 1- sit with driver door open,turn key to ON not start- listen for fuel pump whine as it pressurizes system- if no whine- check fuse for ECM1 or 2,if whine check fuse for eng1 .or could be fuel relay
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Kelly, could be a few issues, security lock out, crank sensor, fuel pump fuse/relay, faulty new pump,faulty ignition switch, etc. Attached links may help you diagnose the crank no start issue you are having.
Check the attached links,video,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info." 96 98 Chevy pickup cranks but won start first steps GM no start no fuel troubleshooting No Start No Spark Cranks OK GMC Jimmy S10 Blazer
Is this an s10? If it is, check the wiring harness on the driver's-side of firewall under cowl. Sometimes it gets disconnected about 1/8'', then it won't start...cheers
If you having fuel flow problem, 1st check the fuel pump make sure is has a good pressure, 2nd check the crank sensors, 3rd common problems on 2.2l injectors which it has only one can be faulty or clog. 4th check fuel regulator, if the regulator is bad it wont keep the pressure build up and lock allowing the injector to work correctly. if your fuel pump is good, your crank sensor may also be going bad, what crank sensor does it it sense the flywheel turning and it send single to ECU (computer) telling it to turn on the pump and keep it running as long as the flywheel keep turning. If pump, crank sensor,regulator and injector are good, my next guess is to have your ECU bench tested. if you have to replace ECU, get it from the junk yard.
replaced your fuel pump and when you buy it make sure to replace the oil sending sensor on the fuel pump it comes with a replacement when you purchase a new fuel pump
Diagnose what the problem is , not install
parts like a cps or fuel pump
×