My radio and Cd player is not working and my clock does not show time - no lights on time unless I push time button
Sounds like you may need a new radio unit. the cd player runs off the radio. check your fuses first, also make sure there is a good electrical ground.
I realize that your problem is by now probably long been fixed. However,, for those like myself who had this exact same problem today, I would like to add. Mine ended up being a blown fuse caused by my son putting a penny in the cigarette lighter. An easy fix, however I'm glad I found the penny before I found the bad fuse, otherwise I would have continued to blow fuses and maybe made the mistake of trying to buy a new stereo.
So funny, just had this exact same issue. The radio appeared to be dead and I was convinced I needed a new one. I found the fuse was blown, and that my replacement fuse blew right away. Then sure enough, I check the cigarette lighter and found a penny in it. I would never have check if it were not for this comment. Problems solved! Thank you!!!
×
Try this, put the key in the ignition and let it be on the first
turn right marked "ACC" or you can turn off the stereo and you will notice that
only the Digital Clock screen will show. Turn the Volume/Audio/Sel knob and press
on the "DISP" button simultaneously for about 4 seconds then release the "DISP"
button. The digital clock will start blinking, and then use the Tune/Seek
arrows pointing up and down to change the time. If the hour digit is blinking change
the hour and after you have changed it press "DISP" then the minute digit will
start to blink change it using the arrows, when you are done press "DISP" again
or leave the clock for between 4 to 8 seconds the clock will start working
normally.
I hope this works for you.
Good luck!
Aquinas
740 views
Usually answered in minutes!
×