At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
remove the rear heel board covers, locate one scew on either side holding seat cushion remove cushion disconnect wiring connectors if it has heated seats, locate 2 screws holding seat back at lower end, the seat back then lifts upwards,,note depending on vin, number there may be 2 upper fixings for seat back located in the trunk behind trim panel. hope this helps. i presume this is a XJ40 model and not a X300, however the removal procedure is similar.
I would suggest replacing all fluids incl: Engine oil/filter, transmission oil/filter, differential oil, coolant flush/replace thermostat, brake fluid, and spark plugs. Some might consider this overkill, but some of these changes are ignored and can greatly shorten the life of the powertrain or brakes.
I'm not sure what you mean by "reset" but have a look for an OBDII / EOBD AUTO SCANNER (there's usually one or two on ebay.) Is that the sort of job you want to do?
×