Cars & Trucks Logo

Related Topics:

Posted on Apr 26, 2011
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

I drove home from my girlfriends house today and none of my guages worked on my 2004 bonneville....wondering if it could be a fuse or whatnot

2 Answers

Chris Graham

Level 1:

An expert who has achieved level 1.

  • Contributor 1 Answer
  • Posted on Nov 22, 2013
Chris Graham
Contributor
Level 1:

An expert who has achieved level 1.

Joined: Nov 22, 2013
Answers
1
Questions
0
Helped
271
Points
0

Same thing happened to my 93 SSE ..My entire dashboard is out,accept for the speedo and tach..It must be a instrument cluster,relay/fuse ....I find it odd all gauages [and drivers info/compass center] went out at the same time...

Ricky Peters

Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

President:

An expert whose answer got voted for 500 times.

  • Pontiac Master 2,620 Answers
  • Posted on Apr 26, 2011
Ricky Peters
Pontiac Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

President:

An expert whose answer got voted for 500 times.

Joined: Jul 26, 2008
Answers
2620
Questions
1
Helped
730181
Points
7327

Bad instrument cluster GM has had a lot of problems with there instrument clusters.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
2answers

My Pontiac Bonneville sse won't turn over last week my security light flashed a couple of times but that was it. Today I drove to town shut it off canst out of the store it wouldn't start. I disconnected...

have the battery load tested as it appears that there is a dead cell. Most batteries need a reserve of 75% to spin the motor and any thing less indicates as a flat battery ( clicking from the starter solenoid)
1helpful
2answers

CAR WONT START

CKP sensor or cam sensor. one goes bad and causes other to go bad. easy fix and not too expensive.
0helpful
1answer

Could bad fuses cause all dash gages to not work

ABSOLUTELY!!!!

Check your Owners Manual and check where the Instrument Cluster Fuse is and then see if it is burned ....
0helpful
1answer

MY GIRLFRIEND DROVE DOWN A FLOODED STREET AND THE CAR CUT OFF AND WILL NOT START BACK

did you check distributor? ( it has a rubber seal, if it is not isolating,it may get easily wet)
0helpful
2answers

2001 bonneville no overdrive.

check fuses under dash, if not fuses hit transmission with pressure washer,
0helpful
1answer

Hi, my girlfriends car is a a 2004 saturn ion coupe. with just over 95000 miles on it. just yesterday her check engine light came on then the car wouldnt go over 25 mph. today i checked it out and i found...

you might need a major tune-up...
and all the oil changes...
change the transmission and check if that works...
if after doing everything that i told you doesn't work...
then you might have a transmission problem!
so good luck!
saturns always break down a lot :(
0helpful
1answer

Engine started dying after serpentine belt replaced. Had mechanic check codes, none showed up. After picking up the car, drove 5 miles, engine died again frequently on way back to machanic. He drove and...

If I remember correctly, the serpentine belt change on this motor can be quite involved. It may require the battery being disconnected to avoid shorting out cables. Check for loose battery cables especially on the negative side where it is secured to the engine block.
0helpful
1answer

2004 Envoy won't turn over and guages don't work

Check and make sure that both battery connections have a SOLID connection...Make sure they are both clean...If they are not clean take them off and simply take a wire brush to them...If this does not work consult someone else
Not finding what you are looking for?

281 views

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...