Serpentine belt diagram for a 1988 ford f150 351 engine
There should be a white decal on the upper rad support bar that shows you the belt routing,in not then draw how the belt is routed before you take it off the car.the parts store may have a routing diagram,if the belt broke then if you know someone with the same type and engine size maybe they will let you look at the belt routing.you can also go to the library and take out a book or draw the routing from the book for your car.
SOURCE: serpentine belt diagram:
if yours has the 3.8L then here is the diagram. Hope this helps
~ Zach
SOURCE: serpentine belt diagram:
The belt routing diagram is located on the top radiator cross member by the hood latch. You should see it when you open the hood. If it is not there, all Chrysler, Dodge, and Plymouth minivans, from 1993 to at least 1999, used the same 3.3L engine setup, so find someone with one and look for the diagram where I described.
SOURCE: serpentine belt
When you open the hood there is a diagram on a sticker that shows exactly how to do this. Should be on the front lip or the side of the engine compartment. You have to make sure you get it lined back up right and remember to check it once the engine has been started and make sure it running on all the pulleys correctly.
Here is a good diagram that should be able to help in case your sticker was damaged or removed. Good luck!
http://www.2carpros.com/car_repair_information/tec_info/1999/pontiac/grand_am/1999_pontiac_grand%20am_drive_belt_routing_diagram.htm
1,334 views
Usually answered in minutes!
×