Question about 2001 Isuzu Trooper

1 Answer

4jx1 camshaft marks on isuzu trooper 2001 3,0 dohc engine

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Isuzu Master
  • 459 Answers

The timming gear that the belt runs on has a mark (V cut in gear) to rear cover at about 12 o clock and crank pulley has timming mark for top dead centre, both cams have cut outs in rear that a special tool (camshaft stopper 5-8840-2592-0) locks into to hold cams in correct position, but can do without this, if the cam belt gear is off, the keyway should be at 12 o clock. the marks in the camshaft gears (dots) is for assembly of sissor gears to solid gears on camshafts that run together and they should match up only if you had this appart.

4jx1 camshaft marks on isuzu trooper 2001 3,0 dohc - stevenhurc_12.jpg no.1 is timming mark

stevenhurc_13.jpgthis is the locking plate tool

Posted on Apr 24, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the name of a sensor behind the transmission and it's function


no photos no joy
we can;t guess engines or your country, is this in canada?
engines.
3.2 L 6VD1 SOHC V6
3.2 L 6VD1 DOHC V6
3.5 L 6VE1 DOHC V6
3.0 L 4JX1 TD I4
3.1 L 4JG2 TD I4

is car A/t trans, or stick
is it 4wd?
we can not guess drive trains, ever.... (1 in 1000 sure)
not this car.

Nov 18, 2015 | 1999 Isuzu Trooper

1 Answer

We live in New Zealand and own a 1998 Isuzu Bighorn, 3.0D. About 3 months ago it started idling roughly and stalling just after starting. Then it stalled on me when I was driving 70kph. It also has no


wow first post ever posting country ,what a brave person. !!!!
welcome to USA forums ,that have no such car.(truck)
the line up. (wiki list) so its 3.0L 4JX1
stalls and lost power.
The 4JX1 is a 3.0L direct injection diesel engine, turbo, some intercooled, which replaced the 4JG2 in the Isuzu Bighorn/Trooper/Holden Jackaroo. It uses unit injectors and 4 valves per cylinder.

can be caused by many reasons. get it scanned yet. ?
or see FSM book on flash codes from the direct injection fuel
controller? (per this engine option and market)

does turbo have proper boost? (PSI boost or +1 bar boost?)
does it even have a boost gauge.?
there are over 50 causes, of stalls (most inside engine)
but its not getting boost or the injection rates are wrong.
there are basic tests for each covered in the FSM
Factory (oem) service manual, with coverage for this engine.


3.2 L 6VD1 SOHC V6
3.2 L 6VD1 DOHC V6
3.5 L 6VE1 DOHC V6
3.0 L 4JX1 TD I4
3.1 L 4JG2 TD I4

Feb 15, 2015 | Isuzu Cars & Trucks

3 Answers

Manual for time belt replacemant Isuzu Trooper 1999, 3l disel engine


4JX1 diesel engine has a belt . 4JGE is a different engine completely. To change it set #1 on tdc fireing stroke using the mark on the back lip of the crank pulley (sit it at 12'oclock) and see the mark on the camshaft bearing matches the notch on the pulley .Ignore the marks on the lower belt pulley.
Tensioner and cover removal/replacement is standard and the chnage period is 60,000 miles.

Dec 09, 2009 | 1999 Isuzu Trooper

2 Answers

My Isuzu Trooper 2004 4JX1 turbo just underwent a general engine overhaul. Its cranking but will not start. All electricals are ok. Does the PCM needed to be reset for it to start?


The ECU will be fine with a engine rebuild but the 4JX takes a bit longer to start if all the injector oil paths are empty - can be up to 5 or 6 mins of 20 second cranking bursts.
Also if you rebuilt due to diesel in the oil from bad injectors the control valve for the injector oil pressure may be faulty so it wont start.

Apr 08, 2009 | 2001 Isuzu Trooper

1 Answer

Isuzu trooper 2002 RLV engine. camshaft timing


Sorry for the severe delay.
I am personally going back to answer your unanswered question.
I do not know if you still need the answer, but I am going to answer it in case you still do.

Click on the following direct Link. It has the Timing Belt Diagrams and Photos with Marks for the Camshaft and Crankshaft that you will need. It also has numerous other helpful diagrams, instructions and photo's for use.

Again my apologies...
Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!


http://www.2carpros.com/car_repair_information/year/2002/make/isuzu/model/trooper/2002_isuzu_trooper_timing_belt_diagram_marks.htm

Feb 21, 2009 | 2002 Isuzu Trooper

1 Answer

Need torque settings for dual mass flywheel in 3.0 isuzu trooper


diesel 4JX1 engine
apply engine oil to threads
1st- 59Nm(43lb ft)
2nd- 60-90deg.
3rd- 60-90deg.

Jan 03, 2009 | 2001 Isuzu Trooper

Not finding what you are looking for?
2001 Isuzu Trooper Logo

3,140 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

Marvin
Marvin

Level 3 Expert

85161 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

459 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...