This is a known problem and is caused by a faulty hazard switch. Replace that and your problem will go away.
Turn Signals Problems on Malibu Impala Alero Cutlass Grand Am Monte Carlo...
Turn Signals Problems on Malibu Impala Alero Cutlass...
If you have turn Signals Problems on...
SOURCE: 2002 Chevy Malibu
I have clicking noises too...I was told depending on what side you hear the clicking on is the side a light is ready to go out. Mine was on the right and sure enough a bulb went out in the passenger tail brake light. I fixed and replaced the bulb and the clicking went away. Later I noticed some corrosion on the wire connecting to the same area the bulb was replaced and shortly after, the bulb went out again and the clicking returned.....
Googling that "symptom" for the 2002 Malibu DOES point towards the hazard swith but it has been told to me and proven in my situation that it can also be a warning that something in the network of the lights and switches has an issue.
SOURCE: 2003 Chevy Malibu. While driving
Kemo68 90% of the time when the turn signal keeps clicking as your driving down the road. Turn signal and hazard switch if located in the dash. The hazard switch & turn signal are on that switch together in dash. $18.00 for switch and dealer will tell you this is a comom thing that happens in the Malibu. That fixed mine the first time.
Rich M.
SOURCE: problems starting
I own a 1998 Chevy Malibu personally, change the ignition switch I had the identical issue, the switch eventually stopped turning completely, my vehicle had to be towed!! Save yourself a headache, I got one from a junkyard for 2.00, but it had to be programmed for the vehicle, I would take it to a trusted shop or dealer.
SOURCE: 2004 Chevy Malibu Classic and problem is turn signal goes out
the hazzard switch is together with the turn signals, so if they are not working properly, check hazzard switch. the switch has a built in timer for hazzards and turn signals.
878 views
Usually answered in minutes!
×