Compass not working right - 1996 Nissan Pathfinder

It usually means the compass on the vehicle needs recalibrating. That is the thing that tells you are going north or wherever in the mirror. The module is in the back of the mirror. Resetting is usually very easy.

Find an empty car park.
Press the Compass button on the mirror.
Do 3 complete circles left.
Do 3 complete circles right.

Google

year make model manual

They are all online. Press CTRL+F and type in Compass,.

here are some youtubes on how to do this pick one that looks like you can follow and see if it works out for you. it sure looks like it will be a job. good luck on this job.

https://www.youtube.com/watch?v=y_Lgi7xjFIs https://www.youtube.com/watch?v=Z4vTZgh48AU

No because if the phone connection works, it means the radio amplifier works. You either have a radio stage issue or an aerial issue. In fact it appears to be a well known issue!

Need help regarding 2014 compass sport audio system

https://www.myjeepcompass.com > ... > Audio Systems
Jun 11, 2019 - I just bought 2014 Jeep compass sport , it has stock radio RES basic one Uconnect ... No sound at all on AM/FM, and sound on everything else ...

Fuse Box Diagram Jeep Compass (MK49; 2011-2017)

https://fuse-box.info > jeep > jeep-compass-mk49-2011...
Here you will find fuse box diagrams of Jeep Compass 2011, 2012, 2013, 2014, 2015, 2016 and 2017, get information about the location of the fuse panels ...

There are two fuses one in the right I/P junction block an one in the left I/P junction block ! The right is marked DK / RKE 10amp fuse. The left is marked A/C / CRUSE 10amp fuse ! I don't think these are the problem ! These fuses supply power to the microprocessor in the driver information center . According to my service information the microprocessor supply's power to the ambient air temperature sensor an to the compass.
This mode displays an 8 point compass heading on the left hand side of the DIC. The compass will display the current vehicle direction relative to one of 8 compass headings using N, NE, E, SE, S, SW, W, and NW for the readout. The ambient temperature displays on the right hand side of the DIC. If the ambient temperature is below 3?°C (37?°F), the temperature reading will toggle between displaying the outside temperature and the word ICE for two minutes. If the temperature is less than minus 40?°F for more than 2 seconds, OC will display. If the temperature is above 140?°F for more than 2 seconds, SC will be displayed. If OC or SC is displayed DTC's will be set. For compass calibration and compass magnetic variation adjustment refer to Electronic Compass Calibration .

cam, timing right.?
you really need the FSM.
read all the steps and not guess.
really
its all here
https://www.techauthority.com/en-US/Pages/FacetSearchResults.aspx?make=Jeep&year=2007&model=COMPASS+LIMITED+4X4&engine=2.4L+4+CYL+DOHC+16V+DUAL+V.V.T.&producttype=Service+Manuals&ptCatId=3083
if the bible above is too $$$
alldata.com has it all the time and is only 15 bucks

http://www.scantool.net/software/alldata-diy-1-month-subscription.html


log in and read.

Calibrate the compass built into the upper-right corner of the rearview mirror by holding the compass button (an "N" with two crossing lines) until your zone number appears. Determine your zone number by looking at the map in the owner's manual. Press the compass button until a "C" appears. Then drive in a circle three times at 5 mph or less in an uncongested area. The compass will automatically orient as a result of the circling.

Read more : http://www.ehow.com/how_5927729_reprogram-avalon-after-battery-change.html

block front wheels and jack up rear slightly off the ground, keeping your body parts out of harms way you can grab and shake tires, if they move back and forth or in and out even slightly it is time for bearing work

try changing teh hazard warning light switch

Of course that's what the manual say because more money for the dealer. Try disconnecting the battery and see how that works. If not let me know and I fine some way for you.

Cheers