Question about 2001 Honda Accord

2 Answers

Lost resistance on clutch pedal and hard to change gears also when topping up clutch fluid it does`nt last that much and leaks from slave cyclinder

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,926 Answers

If the slave cylinder is leaking, replace the slave cylinder. You are loosing hydraulic pressure in the clutch and is the reason why it is not engaging correctly.

Posted on Apr 13, 2011

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 594 Answers

YOUR ONLY SOLUTION IS TO REPLACE THE SLAVE CYLINDER
AND BLEED THE SYSTEM FREE FROM AIR THAT WHY THE PEDAL
HAS GOT LITTLE RESISTANCE

Posted on Apr 13, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My clutch pedal is very loose and can't seem to change gears,pls help


If light pressure on your clutch pedal causes it to fall or easily be pushed to the floor and you cannot feel a normal point in which the clutch should engage it is quite possibly the slave cylinder. Most mechanic shops will tell you to replace the clutch and while doing the service they will replace the slave cylinder. Do you see or smell any brake fluid leaking? Brake fluid is used in the clutch hydraulic system. So if your brake fluid is low or you can see it leaking or smell it burning this would Point towards slave cylinder. There are other ways to check if your slave cylinder is working appropriately by looking under the vehicle having the clutch pedal pushed and seeing if the cylinder is engaging the transmission and then feeling for resistance.

Sep 20, 2017 | Cars & Trucks

2 Answers

Hard to get my car in first or second gear,and reverse crunches,even when driving for a while it's really hard to change gears,what could be the problem ?


if it has a hydraulic clutch ,the problem is a failing clutch slave cylinder not holding pressure
the leak is probably from the slave cylinder
the indications are that the clutch pressure plate is not properly clearing the clutch plate and the drag is causing the problems

Oct 14, 2015 | Cars & Trucks

2 Answers

What could cause a clutch pedal in a 1996 honda accord to lost pressure


no fluid in the clutch reservoir due to a failed clutch slave cylinder
time to replace both the clutch slave and master cylinder

Dec 02, 2017 | 1996 Honda Accord

1 Answer

2004 rx8 clutch won't disengage..you can shift it with the motor off but it will not shift with the engine running,.. I replaced the master cyclinder already


If you lost resistance from the pedal, you may need to replace the clutch slave. The clutch slave is the one at the end of the clutch line attached at the transmission. Check also for leaks on your system.

Sep 04, 2011 | 2004 Mazda RX-8

6 Answers

My 1994 ford rangers clutch pedal just lost all pedal


There are two types of clutch actuators. (Mechanical & Hydtraulic)
A. For mechanical type,- Check the clutch cable as
this could be cut from wear and tear. This is easy
to replace. You can find this connected to the
pedal and the clutch lever near the transmission.
B.For hydraulic operated - Check the level of the
hydraulic oil at the cylinder of the hydraulic
actuator under the hood. This actuator is
directly connected to the pushrod driven by the
pedal. If the actuator is leaking, you have buy
a repair kit (Hyraulic clutch repair kit for Ford
Ranger 1994 MOdel.) These items must be
repaired to activate your pedal.

Oct 14, 2009 | 1994 Ford Ranger Supercab

2 Answers

Alfa 156 2.0 TS Clutch pedal has no resistance, and can not select gears with engine running


is the clutch hyraulic? if so, ck fluid level. if its out of fluid you will need to replace the master and slave clutch cylinders.

Oct 02, 2009 | 2000 Alfa Romeo 156

2 Answers

1998 saab 9000 clutch issues


when you say you've lost resistance does the pedal stay to the floor or does it spring back up?

Mar 01, 2009 | 1996 Saab 9000

Not finding what you are looking for?
2001 Honda Accord Logo

329 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Marvin
Marvin

Level 3 Expert

85206 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...