At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Hi I have a 1996 Delica spacegear , model PF8W with 4M40 engine. The very first time i started it, i observed that the engine was shaking exsessively at Idle speed and as you accelerate it continues shaking until it gets pass 1500 rpm. I would like to know how I can fix this problem.
I have a 1996 delica spacegear, model PF8W, with a 4M40 Turbo diesel mechanical pump. From the very first time i started the engine,I observed that it was shaking excessively at idle speed
and as you accelerate, it continues to shake until it passes 1500 rpm and then smooths out.
how can i fix this defect
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
delica spacegear
secret year and secret country and no engine told
what year,what engine ,35engines used world wide all years.
see how years matter, most> all books are by years. see?
1968 to present no non deity can guess.this ever.
there are 2 causes bad engine (weak) or bad transmission not told.
if RPM of engine rises good but not MPH that means bad trans
if RPM is low only and weak that is a weak engine
we check all fuses
then we scan the PCM in USA 1996 up all all OBD2 scan tools work
and it tells you things bad, called DTC errors
The service and repair manual with pictures and diagram will give you step by step help to fix the problem on your own and you will get the manual from the given link https://toolsnyou.com
Probably, but why would you do this? The 4d56 is 2.5L, the 4m40 is 2.8L, some come with a turbo. You would have a loss of performance, and have all sorts of issues with fabricating bits and pieces to make it fit, plus all the injection and control issues.
You can use thar switch to control transmission/gear box response, middle is for normal driving, power is for holding gears up to higher RPMs and the other ones should say some like Snow, basically starts driving the car from 2nd gear to avoid wheels slippage.
try changing all the heater plugs there are warn out by now,,if it realy dont like starting up on cold days do what i do,,, give it twice the heat up time,,,,,
turn on the kye wate till the heater light go's out then quikly switch it off and turn it back on for a re-heat before trying to start it up,,,also try changing the glow plug heater relay,, it should hold the glow plug heaters on for about 30 seconds after the light has gone off even if the engen has started and is running
but i bet its not doing this? giving twice the heat takes less out the battery than cranking it over and your not wearing out the starter as well?
doing this to my old girl gets her going every time!!!!!
White smoke is a sign of unburnt diesel fuel, check your glowplugs as thats the most common cause when starting .It will start but not hot enough to burn fuel at start up, also check glowplug relay if not the plugs
Delica Owner 4m40
×