Question about 2005 Toyota Tacoma

2 Answers

I have a 2005 Toyota Tacoma. The fob key works but locks only 3 doors (passenger and 2 back doors) but not the driver side door. Any idea on the problem?

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toyota Master
  • 5,763 Answers

This may be due to a bad actuator lock on the driver door , if you lock the doors using the inside door button and you get the same doors locking without the driver door locking then this is the actuator lock thats bad, this is a motor that controls the lock linkage, most newwer cars and trucks when this part goes bad the latch needs to be replaced as the lock motor is all part of the latch, the door panel would have to e removed and the latch replaced, good day.

Posted on Apr 10, 2011

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toyota Master
  • 4,977 Answers

It could be the power door lock motor on that door or the lock motor is not getting the signal from the module.some times the wires that run between the car body and the door break and need repairing.these are covered by a rubber tube that is fastened one end to the body the other to the door,you can see it with the door open.

Posted on Apr 10, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

I lost remote to my 2007 corolla how do i get a new one if i am not the original buyer


go to any Toyota dealer. They will sell you a new key fob but they also charge extra for programming. Total cost for the key fob and programming will be around $100. any Toyota dealer can do it for you

Apr 02, 2015 | 2007 Toyota Corolla

1 Answer

Bmw drivers door only wont lock/unlock with key fob


Could be your driver door lock mechanism that is going bad , since the other door are working, it cannot be the fob. I would try to change the driver side door latch mechanism.

Apr 02, 2014 | 2008 BMW 320i Automatic

1 Answer

Equinox radio


Possibly, the bundle that goes through the door also have speaker wires in them. Check there.

Nov 24, 2013 | Cars & Trucks

1 Answer

Passenger door will not lock or unlock with key fob?


Passenger door lock is electronically controlled by the door lock actuator. You will need to replace the door lock actuator.

Jul 08, 2012 | 2003 Mini Cooper

2 Answers

2007 Toyota Tacoma key fob


no.. u need to have a dealer do it.. they also have a tool ti check it the remote is transmitting a signal as well

Jul 27, 2009 | 2003 Toyota Tacoma

1 Answer

Program my remote


Program your factory keyless entry functions
For 2001+ Tacomas equipped with a factory alarm or keyless entrymag-glass_10x10.gif, here are some programming options that allow you to adjust the way your locks work.
The first programming option allows you to set the entry unlock to: (A) unlock the driver door with one push, and the remaining doors with a second push OR (B) unlock all of the doors with a single push.
  • Open the driver's door. Remove the key from the ignition switch.
  • (Complete these steps within 40 seconds)
    1. Insert the key into and remove it from the ignition switch 2 times.
      (IN - OUT - IN - OUT)
    2. Close, then open the driver's door 2 times.
      (SHUT - OPEN - SHUT - OPEN)
    3. Insert the key into and remove it from the ignition switch 1 time.
      (IN - OUT)
    4. Close, then open the driver's door 2 times.
      (SHUT - OPEN - SHUT - OPEN)
    5. Insert the key into the ignition switch and leave it in.
    6. Close the driver's door.
    7. Turn the key from LOCK to ON 4 times, ending at LOCK
      (LOCK - ON - LOCK - ON - LOCK - ON - LOCK - ON - LOCK)
    8. Wait for the locks to stop, then remove the key from the ignition switch.
  • On the key fob, press and release both LOCK and UNLOCK buttons at the same time.
    1. [For all doors unlock] press and release the UNLOCK button.
    2. [For driver door unlock] press and release the LOCK button.
  • Open the driver's door. The programming is complete. If programming did not occur, start over.

Jan 13, 2009 | 2001 Toyota Tacoma

Not finding what you are looking for?
2005 Toyota Tacoma Logo

633 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

Marvin
Marvin

Level 3 Expert

85178 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...