Question about 1991 Lexus LS 400
I have a 1991 Lexus LS400 and the LED readout on the radio is starting to darken and it is getting harder to see what the display says. The question I have is can you replace just the LED display and if so how do you do that, also where could I get just that part. The radio is a AM/FM/Cassette and six disc CD player.
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: need replace head light bulb
open the hood then look down ont he side that is blown there should be a black rubber boot covering the light look for the wiring then slide the boot back release the sension clasp and pull it out replace and reverse the process to put everything back togather
Posted on Nov 25, 2008
slide the lower part of shifter handle down and you will find two screws, but there is 2 wires coming in from center console for overdrive button.you have to remove the center console cover and remove the 2 wires from connector and then pull up threw handle.when you go back together you will have to guide them back threw the handle.
Posted on May 21, 2009
Not too bad. Not much room, just enough to drop the starter. It is probably easier to go up through exhaust if you can get your exhaust shield off the manifold .
Posted on Aug 07, 2009
remove rear seat then remove cover in the trunk, you will see a cover remove thatcover and remove 8 bolts holding fuelpump in tank,also dissconnect connector to fuelpump with bolts removed the pump pulls right out.hope this helps.
Posted on Mar 01, 2010
Tips for a great answer:
Aug 21, 2015 | 1991 Lexus LS 400
Nov 19, 2013 | Cars & Trucks
Oct 25, 2010 | 1991 Lexus LS 400
Jan 15, 2010 | 1991 Lexus LS 400
Dec 16, 2009 | 1991 Lexus LS 400
Jul 25, 2018 | 1991 Lexus LS 400
98 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: