Routing eng belt - 2005 Toyota Tacoma

go to http://www.youtube.com/watch?v=3fxpQmGpeqM. This is video and a diagram on repolacing the belt.

this is for a system with a/c. If you don't have a/c let me know and I will get you the correct one but i'm sure that you have a/c and power steering.

When timing belts are installed, the normal position of the crankshaft is for #1 cylinder to be at TDC. Here is a picture of the timing belt routing and the timing marks.

Please let me know if you have any questions, and thanks for using FixYa.

Fig. Accessory drive belt routing-2.7L (2TR-FE) engine

Fig. Accessory drive belt routing-2.7L (3RZ-FE/M) engine

Who is all the dumb jakelegs who put serpentine belt routings on here for a v-belt truck. A bunch of Dumb A holes

SERPENTINE DRIVE BELT ROUTING DIAGRAM IS ON THE ENGINE.LOOK DOWN AROUND WATER PUMP PULLEY AREA YOU SHOULD SEE BELT DIAGRAM.IF YOU DONT SEE BELT DIAGRAM.AUTO ZONE OR ADVANCE AUTO WILL PRINT YOU ONE OUT.

try to locate diagram of belt routing - Google "2002 Pontiac Montana (your eng.size) belt routing diagram" then click over to Google images. I know the belts run close but shouldn't be contacting anything but pulleys and idler

you will need a ratchet wrench or box end wrench with a 5/8" size socket or wrench to hold pressure on the tensioner to remove tension off the belt,then remove old belt and reverse procedure,the belt routing is usually located on the top of the radiator or in the owners manual

In the search bar, type---( belt routing diagrams,)
Click on the site that says----- serpentine belt routing diagrams and timing belt.
It will take you to---- www.2carpros.com/car_repair_information/index.htm
Scroll down and click on the year, make , model
Then scroll down to the different diagrams for that truck.

On the underside of the hood (sometimes on the radiator shroud) there should be a decal showing the routing of the belt for the enging that came in the car originally.