96 chevy lumina sedan

Question edited for a lot more clarity.
Question moved to model category.

It might be the flasher relay and it might be the horn relay although horns tend to seize up through lack of use. the flasher relay is is separate to the Hazards relay which is often part of the switch.

https://www.google.com/search?q=1997+chevy+lumina+flasher+relay+location

Chevrolet Lumina (1997) - fuse box diagram - Auto Genius

https://www.autogenius.info > chevrolet-lumina-1997-f...

Jan 1, 2018 - Fuse, Description. 1, CIGAR LIGHTER - Instrument Panel and Console Cigar Lighter. 4, WAC- WAC Control Assembly Solenoid Box, Mix Motor, ...

Chevrolet Lumina (1995-2001) fuses and relays

https://fuse-box.info > chevrolet > chevrolet-lumina-19...

Here you will find fuse box diagrams of Chevrolet Lumina 1995, 1996, 1997, 1998, 1999, 2000 and 2001, get information about the location of the fuse panels ...

Easiest way though https://www.google.com/search?q=auto+electrician+near+me

..

I suggtes check and replace the Flasher, this edvice is located below left hand side of the instrument panel.

Hope helps.

did you change the flasher relay ? it controls the flashers and the hazard

hi this sounds like the flasher box for the turn signals my be u/s they run on a separate box to the hazards, i think you will find this in your fuse box it should be one of the relays in there, also have you checked the fuse for it as well? hope this helps

The turn signal flasher relay may have a problem.Turn on the hazards and follow the clicking sound to the source and usually the hazard flasher and turn signal flasher are very close to each other.Remove the one that is clicking and put it in place of the turn signal flasher.If the Turn signals then work you will need to purchase a new turn signal flasher relay.They are usually just a few dollars.

A fuse panel is in the glove compartment; remember that turn signal and hazard signals work with Flashers: the turn signal flasher is mounted in a clip on the right side of the steering column support bracket. The hazard flasher is located in the component center, under the instrument panel, on the right side.

Replace the flasher by unplugging the old one and plugging in the new one.

Hope this help (remember comment and rated this).

do you hazard warning lights work? firstly id check the fuses, check to see if the indicator fuse has blown, if not that then when you put the indicator on does it make the ticking sound it should? if not then your problem will be the flasher unit, the flasher unit is either a three or four pin relay located usually near your fuse box. if the flasher unit is ticking then it should be working correctly. if the worst comes to the worst then it would be a faulty stalk, but hopefully not.

The hazard lights has it's own flasher, change the flasher for the turn signals and see if that works. To find out which flasher it is, put on the hazard lights, and put your finger on the flashers, which ever one you don't feel clicking is the turn signal one.

try replacing the flasher first. and check the two fuses for hazards and signals.

bulbs are all good ? the switch in steering wheel do the hazards work can you hear the flasher relay blinking ground wires all good