Needed timing belt replacement, marks configuration mazda BT50 2.5 turbodiesel common rail

Would need to see type of engine and a good look ,does it have any marks on front of engine ? if not then crank mark will be through a hole in bellhousing ,injector pump if common rail will have no marks as not needed to be timed in ,camshaft if no holie in spoke on gearwheel tand no mark on rim then remove the rocker cover and look on back of camshaft for a slot ?but no year mentioned here so ?? why didnt you put some white paint marks on gears before you took it apart

Choose:

1994 Mazda MPV timing belt replacement, 6 cylinder DOHC ...

? 3:46
https://www.youtube.com/watch?v=sD2G-NzycvU
Aug 11, 2011 - Uploaded by rsarp
1994 Mazda MPV timing belt replacement, 6 cylinder DOHC 3.0... engine so the valves would not be bent ...

How to replace the timing belt on a 1994 mazda 929 3.0 ...

www.fixya.com/.../t25991928-replace_timing_belt_1994_mazda_929_3...

4 hours ago - how to replace the timing belt on a 1994 mazda 929 3.0 dohc 24 valve... I have a 2000 Mazda 626 4cyl 2.0 liter DOHC engine replacing the timing belt, what ... 2004 6s, 3l. where is the canister purge valve solenoid located?

Where are the timing marks on a 1994 mazda 929 3.0l - Fixya

www.fixya.com/cars/t25991952-timing_marks_1994_mazda_929_3_0l

4 hours ago - where are the timing marks on a 1994 mazda 929 3.0l - Mazda Cars ...1994 Mazda E2000 Cam Timing Mark Positions to Replace Timing Belt ... on a 1994mazda v6 dohc 24 valve engine How to align the timing mark on the ...

Mazda Timing Belt Replacement

The PCV is a valve and a hose, that sucks engine ring bypass gasses and reburns them. if it plugs up the engine leaks oil.

if the hose cracks it sucks air and the AFR goes lean and bucks.

jerks.

only on engines (unstated) that use a MAF sensor.

engine that use a MAP sensor ,race too fast with full power and no jerk with air leaks.

next time post engine type. as we can not guess this.



the list.....



2.0 L FS-DE I4 (99-02)

2.3 L L3-VE I4 (02-05)

2.5 L GY-DE V6 (99-01)

2.5 L AJ V6 (99-02)

3.0 L AJ V6 (02-06)

2.0 L RF MZR common rail turbodiesel









WHAT ENGINE PLEASE.

if unsure, (why fix any engine,if unsure>)but in the USA

the hood EPA sticker states this clearly.

no engine , no country, no joy,

I just did one in my shop. here is the marks

You need to purchase a Haynes Manual or better. They are very common in your nearest chain part store. Like Autozone, Advance, Napa. More than likely you will have to set the crankshaft at TDC. "top dead center" and allign the two marks with the cam shaft! Watch when you put tension on the belt it will move the camshaft sprocket! And throw it back out of time.

special tools are needed, so any Mazda or Ford dealer can set it up. there are no timing marks. you may have bent valves.

Here is a website that a free manual can be down loaded for your vehicle


http://ezinearticles.com/?Find-the-Free-Auto-Repair-Manual-You-Need-Online&id=92717

check aboutauto.com they might have it

http://www.autozone.com/shopping/repairGuide.htm?pageId=0900c1528019f906



there are other diagrams on that page if this is not the right one.

http://www.autozone.com/shopping/repairGuide.htm?pageId=0900c152800397c6