2005 Chrysler PT Cruiser Logo
Posted on Mar 23, 2011

How to set time clock 2005 pt cruiser - 2005 Chrysler PT Cruiser

5 Related Answers

Anonymous

  • 77 Answers
  • Posted on Jan 14, 2009

SOURCE: 2005 pt cruiser

EITHER MOTOR SEIZED OR SYSTEM IS CLIGGED

Ad
66 chrgr

mike loshbough

  • 1011 Answers
  • Posted on Jan 25, 2009

SOURCE: where is the crank sensor located on 2005 chrysler pt cruiser?

the crank sensor is located on back right side of engine by were the trans. bolts up.is the no start when could or hot?

Anonymous

  • 87 Answers
  • Posted on Jul 29, 2009

SOURCE: 2005 PT Cruiser leak anti-freeze leak????

the overflow bottle probobly has a crack in the seam of the bottle.you can replace the bottle or remove it and use some epoxy to repair it.

66 chrgr

mike loshbough

  • 1011 Answers
  • Posted on Jul 31, 2009

SOURCE: 2005 pt cruiser misfire low rpm

Have your plugs and wires checked for replacement:)

Anonymous

  • 361 Answers
  • Posted on Apr 18, 2010

SOURCE: timing belt wont tutn on my 2005 pt cruiser 2.4l

Try turning the crank with a socket and a bar. is the tensioner making enough tention

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

How do you setthetime on a 2004 pt cruiser

Clock Setting Procedure (digital clock page 242 of your owners manual)
1. Press and hold the time button until the hours blink.
2. Adjust the hours by turning the right side Tune/
Audio control.
3. After the hours are adjusted, press the right side
Tune/Audio control to set the minutes. The minutes will
begin to blink.
4. Adjust the minutes using the right side Tune/Audio
control.
5. To exit, press any button/knob or wait 5 seconds.

SETTING THE ANALOG CLOCK (page 238 of your owners manual)
To set the analog clock at the top center of the instrument
panel, press and hold the button until the setting is
correct. The clock will adjust slowly at first and then
quicker the longer the button is held.
0helpful
1answer
2helpful
2answers

2003 pt cruiser radio fuse location

Fuse 18 (20 amp) in the power distribution center under the hood.

Fuse 14 (20 amp) in the interior fuse block.

IF your not sure which fuse you can check them by pulling each 20 amp fuse out 1 at a time. It will be obvious if they are blown. If it is not reinstall the fuse and move on to the next one.

I’m happy to assist further over the phone at https://www.6ya.com/expert/jeremy_d728a59f986299fa

0helpful
3answers
0helpful
1answer

How do I change the clock on my 2003 PT Cruiser?

I had the same problem once.

I found out that there are two small dots as buttons to set the clock.

You can find them just below the clock display.

J.S. Staten Island, NY
.
0helpful
1answer

Timing belt wont tutn on my 2005 pt cruiser 2.4l

Try turning the crank with a socket and a bar. is the tensioner making enough tention
0helpful
1answer

I have pt cruiser 2.4 manual. Why am i only getting 25 mpg. 31.000 miles on clock

The government fuel economy specs for your year PT Cruiser are between 24 and 26 mpg highway, depending on what transmission you have (auto, 4spd standard, 5 spd standard), so you are getting what you should. Unfortunately, the PT Cruiser can't do any better than that. It does seem that a car that size would do better, but Chrysler needs to improve gas consumption on all it's vehicles, that is one reason they are in such trouble now.
0helpful
1answer

Error code P0335 (2005 pt cruiser)

p0335 is crankshaft position sensor circuit fault code..possible just a faulty sensor,shouldn't set a circuit code if timing is off..a sensor is probably around a 100 bucks..located just above starter in block
3helpful
1answer
Not finding what you are looking for?

2,048 views

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...