At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Google 1995 impala ss water pump replacement. There are a series of videos on YouTube that will walk you thru the entire process or you can go to any of the forums that will come up as they have the written instructions as well.
I don't think you have anything that will help in your search.
The 95 Impala SS came with a 350 cu in engine stock. The VIN code was P and the horsepower rating was 260. The casting number for that block would be something like 10199001 or 14101148. After 1970 GM started stamping a partial vin number on the blocks to match the original car. If you had the original car you could check the 8th digit of the VIN to verify the engine.
Remove instrument cluster and have it tested or, if you have access to a scanner with data-stream capabilities, you could check to see if vehichle speed sensor is emitting proper voltage /signal.
follow the bottom of the radiator hose till it goes into the goose neck remove the hose and the goose neck the thermostat will be under the goose neck. make sure to replace the gasket with the thermostat
×