At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
when the brake is applied(goes to floor) the engine stalls unless on the throttle.when the brake is applied(goes to floor) the engine stalls unless on the throttle.
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
you could try checking the fuses, but from looking the fuse that does the blinkers also does a lot of other things. What happens if you put the 4 way flashers on?
Look for bad grounds or broken wires up under the front wheel.
check chiltons manuals, they usually have wiring diagrams in the back of them to show you all you need. its hard to find online ones. you always have to pay for those ones
Not sure which engine you have, but here is diagram for 4-banger. I can get the others, but I think the starter curcuit will be the same. This may not be readable after download. Starter circuit is in upper left. I also attached a blowup that is better res.
Start with the basics...meaning check the spark plug wires and spark plugs. While under the hood, inspect all hoses for a vacuum leak(s). Then turn the ignition key on-off-on-off- on...leave in the on position and write down the number of flashes the check engine light indicates....2 flashes = #2....pause.....3 flashes = #3.
Let start from here. Are you able to perform engine repairs or diagnostics???
I am looking for a wiring diagrapm for a 1989 Jeep Wrangler. I have a wire that is running to the alternator with an Orange and red wire that are not hooked up to anything and I cannot find a place for them. It is a single pin connector.
Thanks
when the brake is applied(goes to floor) the engine stalls unless on the throttle.
×