No brake lights

Is the there power to the flasher can? I suspect the turn signal switch is defective.

I am unaware of what a "CO" display is.
Now with the blinkers, hazard, horn and brake lights not working that may be the multi funtion switch (blinker switch) that is located inside the column (where the blinker lever attaches).
Obviously the blinker, hazard and horn will all work off of something in the column. Brake lights, you may think a switch on the pedal.

the brake lights do work with that switch but when you have the kind of tail lights where a turn signal light shares the same bulb as a brake light, the brake light is cancelled for the turn signal by running through the multi function switch inside the column.
The third brake light does not blink so its not on that same circuit.

More than likley your multifunction/turn signal switch is bad.All the lights you are talking about are tied to this switch.

there are two different blinkers , one for hazards, one for turn signals, your brake lights work off of a switch on the brake pedal, i would look to see if that is what is wrong

if your fuse is good. and you have power at the brake light switch and when you hit the brakes you have power coming out the otherside of brake light switch/which would be the white wire/ check that the white wire is sending power up the turn signal switch. if theres power there and your turnsignals work? im afraid that your turnsignal switch is bad rare but it has been known to happen.

you have a short in the wireing fix it fast before you have a "fire"

first check all of the bulbs are good. on some cars if a bulb is burned out the blinker will flash faster than normal.

TEST FRONT RIGHT BLINKER CIRCUIT AND REPLACE THE BULB,,WITH PROPER BULB...A DOUBLE CIRCUIT BULB IN A SINGLE SOCKET WILL DO THAT ALSO A SINGLE SOCKET BULB IN A DOUBLE SOCKET HOLDER....CHECK LEFT SIDE BULB FOR ACURANCY

check the bulbs again make sure the brake and signal light bulb has two filaments in it, the parking lights ony has one filament

check hazard fuse or make sure the hazerd switch is dis engadged. mine was the same problem just cant use the hazard