P1354VVT System Malfunction (Bank 2)
Probably bad plug wires. Start there and then disconnect the battery for 5 minutes reconnect and start engine to see which codes have cleared.
I have had similar problems. The P0302,4,6, and 8 could be the ignition coils, but may be a faulty alternator. I had replaced one ignition coil, but only found out that the alternator was bad. I still have check engine and VSC light on. When I put the key in the ignition and the panel comes on, I can turn the VSC on and off, so the switch is OK. I know I am adding info--hopes it helps someone. Good luck
4,719 views
Usually answered in minutes!
×