I have a 1990 Mustang 2.3L LX and bought a new TSU (temp sending unit) I cant seem to locate where to locate the old one on my block. is there one that runs the fan also? found that one but not for the gauge on the dash.

Question 1

0helpful

1answer

Where is oil pressure sending unit on 1990 chrysler new yorker located

The oil pressure switch and sending unit is located directly above the oil filter and next to the starter motor on the lower side of the engine block.

Jul 21, 2016 • Chrysler Cars & Trucks

0helpful

1answer

Bad rod in 1990 mustang lx 4 cylinder

You might as well replace the engine, it is about the same cost. So you are looking at about $2000.00

Oct 01, 2012 • 1990 Ford Mustang

0helpful

1answer

2008 Town and Country LX 3.3 Liter, temp Gauge is erratic. Where is the temp guage sending unit located on the engine?

They usually put this either on the intake or radiator tank

Aug 28, 2012 • Cars & Trucks

0helpful

1answer

I cant locate the oil sending unit and I was wanting to know if you could tell me where it is. Its a 1990 Ford Ranger 2.9L V-6 Automatic.

Under hood, driver side, lower enginearea, beneath exhaust manifold, left side of oillevel sender, above oil pan rail, mounted in block .... if it is not there it is on the back of the engine on the passenger side below the intake manifold on the block...

May 23, 2011 • 1990 Ford Ranger SuperCab

1helpful

2answers

Looking for a diagram for vacuum hose for a 1990 ford mustang LX.

Hello irlandis2002,

Well, it turns out that there four different possibilities for the 302. Below are the four diagrams. I hope this helps.

Regards,
netvan

Apr 19, 2011 • 1990 Ford Mustang

1helpful

1answer

I have a 1964 mustang with a six cyl. all gauges dont work. put in a new oil pressure sending unit, has a new fuel tank with sending unit,new temp. sending unit wires are all hooked up. I need help finding...

There is a voltage regulator on the back of the instrument cluster printed circuit board. Chances are this has burned out if no gauges work. You'll need to remove the instrument cluster to get to it.

Dec 03, 2010 • 1965 Ford Mustang

2helpful

3answers

Oil pressure guage not working. check engine light not illuminated, engine not overheating,oil up high on dipstick with engine running. drove 5 miles after guage quit working! I suspect oil pressure guage...

Sending unit should be in this location. This is a cheap part that likes to fail.

Feb 01, 2010 • 2002 Ford Mustang

0helpful

1answer

1990 ford mustang lx 4cyl, auto blew out it's transmission fluid. what caused this? new seal and fluid, seems to be fine. is is okay now?

a Plugged vent on the tranny could cause this and an overfill of transmisson fluid could cause this, but without inspecting it would not know the cause or if it would strand you again?

Jul 06, 2009 • 1990 Ford Mustang

1helpful

1answer

Can't locate oil sending unit on civic

Your vehicle is equipped with an oil pressure switch (not a sending unit) and it is located directly above the oil filter.

May 23, 2009 • 1994 Honda Civic

0helpful

1answer

I need a wiring diagram for the jeep cherokee's temperature sender unit for a an m Registration 1994 model have you got one?

The temperature sending unit is located on the right rear of the head. Next to the valve cover gasket. It is blocked from good access by the MAP sensor. If you remove the MAP sensor, the black flat thing mounted to the upper center of the firewall, you can access the temp sending unit with a deep well socket. Make sure the engine is cold, or the pressure of removing the TSU will send coolant everywhere.

Sep 09, 2008 • 1993 Jeep Cherokee Country

Question 2

mike mountain

Master 1,916 Answers
Posted on Mar 03, 2011

mike mountain

Master

Joined: Dec 22, 2010

Answers

1916

Questions

3

Helped

673151

Points

6183

Just a guess here but the sender for the gauge is almost always located very close to the thermostat housing

1 more comment
Anonymous Mar 03, 2011

no i checked when i replaced the pump and t stat .
mike mountain Mar 03, 2011

it's on the driver side of the head, near the firewall. There's a right angle adapter screwed into the head, and the sender is screwed into that. It looks like a bell with a threaded rod coming out...
Anonymous Mar 03, 2011

Thankyou I will change it in the morning then.

×

Related Topics:

I have a 1990 Mustang 2.3L LX and bought a new TSU (temp sending unit) I cant seem to locate where to locate the old one on my block. is there one that runs the fan also? found that one but not for the gauge on the dash.

1 Answer

mike mountain

Add Your Answer

Attachments: Added items

Related Questions:

Where is oil pressure sending unit on 1990 chrysler new yorker located

Bad rod in 1990 mustang lx 4 cylinder

2008 Town and Country LX 3.3 Liter, temp Gauge is erratic. Where is the temp guage sending unit located on the engine?

I cant locate the oil sending unit and I was wanting to know if you could tell me where it is. Its a 1990 Ford Ranger 2.9L V-6 Automatic.

Looking for a diagram for vacuum hose for a 1990 ford mustang LX.

I have a 1964 mustang with a six cyl. all gauges dont work. put in a new oil pressure sending unit, has a new fuel tank with sending unit,new temp. sending unit wires are all hooked up. I need help finding...

Oil pressure guage not working. check engine light not illuminated, engine not overheating,oil up high on dipstick with engine running. drove 5 miles after guage quit working! I suspect oil pressure guage...

1990 ford mustang lx 4cyl, auto blew out it's transmission fluid. what caused this? new seal and fluid, seems to be fine. is is okay now?

Can't locate oil sending unit on civic

I need a wiring diagram for the jeep cherokee's temperature sender unit for a an m Registration 1994 model have you got one?

Not finding what you are looking for?

1990 Mustang

Where is oil pressure sending unit on 1990 chrysler new yorker located

Ask a Question

Check Out the Latest Top Trucks Report!

Top Ford Experts

ZJ Limited

Thomas Perkins

xxxxxx xxx

Are you a Ford Expert? Answer questions, earn points and help others

Manuals & User Guides

. 1990 Mustang Manual

Related Topics:

I have a 1990 Mustang 2.3L LX and bought a new TSU (temp sending unit) I cant seem to locate where to locate the old one on my block. is there one that runs the fan also? found that one but not for the gauge on the dash.

1 Answer

mike mountain

Add Your Answer

Attachments: Added items

Related Questions:

Where is oil pressure sending unit on 1990 chrysler new yorker located

Bad rod in 1990 mustang lx 4 cylinder

2008 Town and Country LX 3.3 Liter, temp Gauge is erratic. Where is the temp guage sending unit located on the engine?

I cant locate the oil sending unit and I was wanting to know if you could tell me where it is. Its a 1990 Ford Ranger 2.9L V-6 Automatic.

Looking for a diagram for vacuum hose for a 1990 ford mustang LX.

I have a 1964 mustang with a six cyl. all gauges dont work. put in a new oil pressure sending unit, has a new fuel tank with sending unit,new temp. sending unit wires are all hooked up. I need help finding...

Oil pressure guage not working. check engine light not illuminated, engine not overheating,oil up high on dipstick with engine running. drove 5 miles after guage quit working! I suspect oil pressure guage...

1990 ford mustang lx 4cyl, auto blew out it's transmission fluid. what caused this? new seal and fluid, seems to be fine. is is okay now?

Can't locate oil sending unit on civic

I need a wiring diagram for the jeep cherokee's temperature sender unit for a an m Registration 1994 model have you got one?

Not finding what you are looking for?

1990 Mustang

Where is oil pressure sending unit on 1990 chrysler new yorker located

Related Topics

Ask a Question

Popular Questions

My seat belt alarm keeps dinging even though my seat belt is secured/fastened. how do I make it stop?

Shaker 500 stereo

A diagram of a 2003 Ford Mustang interior fuse box?

I need a fuse box diagram for a 2008 ford mustang

Firing order diagram for a 289 motor

Check Out the Latest Top Trucks Report!

Top Ford Experts

ZJ Limited

Thomas Perkins

xxxxxx xxx

Are you a Ford Expert? Answer questions, earn points and help others

Manuals & User Guides

. 1990 Mustang Manual