SOURCE: will not start after it stalls untill about 5-10 minutes
Your problem is most likey your intake gasket.They have a problems on the SOHC engines where the intake gasket shifts & starts leaking vacuum at the #1 intake runner causing a missfire on Cylinder #1.While the engine is Idling buy some throttle plate cleaner & spray throttle cleaner down at the #1 Intake runner where the intake meets the head.If engine stalls or runs rougher that's your problem.I have replaced dozens of those gaskets for tha reason!! They have a beter design gasket through saturn parts.It has a coating on it to prevent reoccurance.Also you should check you Coolant Temp Sensor,if it's ceramic it's most likely bad.Replacement is brass from saturn.Good Luck
SOURCE: Engine is skipping when accelerating
to check the plug wires start car and mist the wires with a spray bottle of water if wires are bad you will see them arcing works best in dimmly lit area if they arc replace plugs and wires
SOURCE: 1999 Saturn SL 5-speed. The speedometer extremely inaccurate.
could be , probably is the speedometer cable, should be fairly cheap repair
SOURCE: just bought a 2000 saturn sl class. runs rough at
The problem here is the ECTS. Engine Coolant Temp. Sensor. It cost around $12 dollars and takes maybe 5 mins to fix with a 13mm socket. Saturn SL series built before november 2001 have a plastic ECTS. When you buy the new one make sure it has the brass tip as some parts stores still carry the cheap plastic one
Testimonial: "That was the problem. I called the dealer and thats what they told me. It runs great. I had to get a 13mm deep socket . $20 tool, $12 part. Thanx"
SOURCE: I need to replace the right auto transaxle seal on 2000 saturn sl
how to replace transaxel seal
80 views
Usually answered in minutes!
you need to read your 'question' and realize that no one can understand your issue as you have written it-it makes no sense.
×