SOURCE: water pump
A manual will have pictures and everything.
Just replaced mine. Five bolts in bracket holding tension idler, A/C
compressor (if applicable) and power steering pump must be removed to
access 3 bolts in water pump. Just push aside enough to access
remaining bolts. Email at [email protected] if additional info is
needed. Also, diagram serpentine belt before removing. Took me at least
15 attempts and 20 minutes to figure out
SOURCE: Code Reader - P0004 Intake
More than likely the IMRC actuator is bad. See this video for more info and repair info.
http://www.youtube.com/watch?v=qLqpQeIJXek
SOURCE: My 1994 Ford Ranger didn't pass smog. The "check
I had the same issue with mine. Unscrew your instrument panel and pull it out as far as it will go. The lights are held in place from behind so you will need to slip your hand in and rotate the pastic clip that is fixed to the light to take it off. I never saw behind the panel but I heard it's fragile so be carefull. I replaced it with the ABS light (I already know my ABS doesn't work :P).
85 views
Usually answered in minutes!
×