Most likely place the plug as occurred is right at the nozzles that stick out from the hood, they are the smallest and first things that typically get plugged.
I would try to clean those out first maybe with some very small strands of wire and/or compressed air.
If not you can follow the hoses that attach to said nozzles on the bottom of the hood and take off what ever sections you want to check and clean them. Be careful removing the hose from the bottom of the nozzles the hose is often very hard from all heat under there and could easily break the plastic bung off the nozzles.
and of course make sure the system is filled with water :D good luck!
48 views
Usually answered in minutes!
×