At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
If the thermostat was installed backwards, it won't open when the engine heats up. The spring/sensor should go toward the engine and the valve plate goes toward the radiator. If the hoses stay cold, it points to no water flow as above. Hope this helps!
That is the oil pressure gauge not the oil level gauge. Sometimes they can act that way when the oil is thin. When is the last time the oil was changed? Try using a heavier weight oil. When engines wear they require thicker oil. What size engine does you voyager have?
Your electric fan is probibly not running.Fan switch,fan relay or the fan could be bad.If it is getting hot and you pop the hood you should hear the fan running.
Have you tried cycling key for fault codes? Turn ignition to on (not
start) then off, then on, then off, then on, leave it on, and count
flashes of check engine light. flash,flash,pause, flash flash, is
code 22. 3 flashes, pause, then 5 flashes, would be code 35, etc. See
what you get, & get back to us with them if you need more help, and please include what engine you have in the van.
Check the rear lift gate switch. Or it could be that one of the doors or the rear lift gate is out of adjustment and not closing tightly. Try closing all doors and lift gate then from the outside push in on the doors and see if they go in. If it is the doors , when you push on the one that is causing the problem the door ajar chime will stop .
Hi Wayne, what you do is turn the key to the "on" position and back to "off". Do this three times. The engine light will flash. It will flash a certain amount of times, pause, then another set of flashes. The first set of flashes is the first number of your code. The second set is the second number. For example, you see 5 flashes, your first number of your code is 5, and so on.
×