The
airbag light will come on and stay on as long as there is an active
code in the system, this means that something is malfunctioning right now so we will turn the
light on. You really
need to have the codes checked for an accurate diagnosis.
Its possible that you have some problem or your sensor go to bad...
1. Disconnect and isolate the battery negative cable. Wait two minutes for the system capacitor to discharge before further service.
2. From the engine compartment, disconnect the right or left headlamp and dash wire harness connector for the front impact sensor from the sensor connector receptacle
3. From the engine compartment, remove the two screws that secure the right or left front impact sensor to the sensor mounting bracket on the right or left radiator support vertical member.
4. Remove the front impact sensor from the sensor mounting bracket.
That is for replacement, you just reverse the list for install.
Hope helps.
1,291 views
Usually answered in minutes!
×