Installing a Nissan Sentra Passenger Side Manual Non Folding Mirror.

This is a power folding mirror?

The related help links are mentioned below.Click the link below:---
---------How to remove rear view mirror metal foot?

http://schematicsdiagram.blogspot.com/2011/12/how-to-remove-rear-view-mirror-metal.html

----------

power locks, power window and power mirror on the passenger side not working on Ford Windstar
http://howtobyme.blogspot.com/2011/09/power-locks-power-window-and-power.html

----How to Remove Outside Mirrors on Acura Integra?

http://repairhelpcenter.blogspot.com/2011/11/how-to-remove-outside-mirrors-on-acura.html

-------Passenger side Folding Mirror is not operating? http://schematicsdiagram.blogspot.com/2011/12/passenger-side-folding-mirror-is-not.html

--------
These will help.
Thanks.

Grab the passenger mirror with both hands. Fold the mirror all the way forward, all the way back and then back to the home position. Sometimes the mirror will get off track if it has been bumped or moved out of place manually.

You can call any Nissan dealership, they should have it but they will more than likely rape you with prices. Being that this is a new car, I'm going to say that this is most likely your only option. Be more careful next time.

On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door

I haven't done this on a Sentra, but I have done it on a Toyota and a Mazda and they were both the same.

I took the black plastic cover off the back of the mirror (this will be on the inside of the passenger door).

There whould be between 2 or 3 screws that you will unscrew. If it is a power mirror there will also be a little connector. Undo the connector and remove the old mirror.

Attach the new mirror and plug in connector if power mirror. Replace the screws and re attach the black cove to the inside of the door.

Hope that helps!

try getting a chiltons manual, or try googling 2004 nissan sentra fuse diagaram schematics. even if you have the owners manual it should be in there

if you are just replacing just the mirror glass, see www.burcoinc.com goto 'redi cuts', goto 'installations' and on the right hand side is a list of the different mirror types.
hope this helps.

screw driver will work then there will be 3 10mm nuts