Where is the number 6 plug in a 1995 Mazda B4000 My dad was told the number 6 plug wire was bad, and I'd like to help him fix it. A diagram would be most helpful. Thanks, Wanda

https://www.bing.com/images/search?q=2001+mazda+b4000+fuse+diagram&qpvt=2001+Mazda+B4000+fuse+diagram&qpvt=2001+Mazda+B4000+fuse+diagram&FORM=IGRE

Were do i start to wear time ing order

Hi there:I suggest check this for 1995 Mazda 929 3.0 liter DOHC V-6...




Hope this helps; remember to rated this answer.

2.3L 4 cylinder? After removing the plastic engine cover, look at the top of the ignition coil.


It should be numbered 1 through 4.

This is plug number 1 on the engine:


Just wire them 1, 2, 3 and 4 to the corresponding numbers on the ignition coil.

best wishes

Here are the firing order diagrams for that vehicle.

2.0 liter




2.5 liter

Here are two links which will show you what you need... it depends on the engine you have.
2.5 liter DOHC V-6
http://autorepair.about.com/library/firing_orders/bl-fo-6767.htm

2.0 liter DOHC L4
http://autorepair.about.com/library/firing_orders/bl-fo-6766.htm

THERE IS A FUSE MARKED DRM IN THE FUSE PANEL [MAY NEED THE OWNERS MANUAL TO LOCATE IT].CHECK IT FIRST.IF IT'S GOOD YOU PROBABLY NEED A NEW MODUAL.FUSE MAY BE MARKED AS DLM.

You didn't post your engine size so please choose the one that works for you....please don't forget to rate:

1995 Mazda MX-6
2.0 liter DOHC L4



1995 Mazda MX-6
2.5 liter DOHC V-6

SOUNDS LIKE THE T.P.S. IS NOT FUNCTIONING. ALTHOUGH IT MAY TEST OK, IF IT IS NOT RESPONDING, THEN IT MUST BE REPLACED. UNLESS YOU HAVE A FUSE FOR THE TPS, THEN IT MUST BE THE ONLY REASON FOR NO THROTTLE RESPONSE. HOPE THIS HELPS. PLEASE KEEP ME POSTED. THANKS FOR USING FIX-YA. AND FOR AN HONEST RATING IN ADVANCE. GOOD LUCK.

Okay, then you have what you need. Just take the drum off of the other side and use it as a reference. You are going to have a hard time trying to find a diagram. The Hayes and others are just general pictures and not necessarily what is on your specific vehicle. I do not have that particular diagram myself.
Please remember to rate this fix.