This is due to lack of spark. You can start at the spark plug by taking it out and making sure that there is no oil or excess fuel on it. There is a special tool you can buy or borrow from your local parts store that you can plug into the spark plug wire and do a bump start (barely tap over the ignition) and it will light up if the distributor is working properly. If it is then the spark plug just needs to be changed. If there is no signal then there is a good chance that either your wire or your distributor is bad.
Have a good one!
Spark plug or spark plug wire or coil.
142 views
Usually answered in minutes!
×