I have been having problems with my 1998 ford windstar 3.8L with rough idle and dying, i changed the mass air flow sensor, and air filter, ran gas treatment through it, and it hasn't helped, then yesterday when i stopped at sweetypi80a stop sign it died and when i went to restart it it wouldn't turn over, all the dash lights work, and bells and stuff it wont start. what is wrong with my van?!?

I have a 98 Windstar and it would die when pulling up to a stop sign, slowing when coming to a stop or making a slow turn. According to Ford recall 98E03 EMISSIONS RECALL some vehicles may stall during deceleration when coming to a stop, during slow speed parking maneuvers and/or coasting thru slow sweeping turns. This may be caused by the Powertrain Contro lModule (PCM) calibration dropping the rpms too quickly during deceleration. This involves reprograming the PCM. The revised calibration will allow the engine rpms to drop slowly during low speed maneuvers to reduce the possibility of a stall. Call your local FORD dealership (have your VIN handy) and have them check to see if this recall has been performed on your vehicle.