I wrote an answer to this once,I thought. How many miles/years on your old transmission oil and filter? There might be dirt in the valve body or servo.
If it were mine, I'd put the correct amount of SEA-FOAM TRANSMISSION Treatment into it,follow the directions, and then do a flush and fill with new filter of my transmission.
When you rev it will it kick into reverse? don-ohio (:^)
Yes it does kick into reverse when I rev high enough but it’s not going anywhere. If I rev really high it jerks back like it wants to but stop like if I’m hitting the brakes. Drive works barely it kicks hard into gear and works. It’s just reverse that doesn’t work and neutral is not moving it’s like if it was in park. 2001 Ford f150 4.6L
×
SOURCE: 1992 Eagle Talon Transmission Problem
hello ,
thank you for asking ,
i know that this is really a silly problem , but i am sorry to tell you that you better to get another transmission automatic gear box , because the repairing will cost you a lot , but if you found that it will not cost that much so it's ok to repair it , and if you have any other problem all you should do is asking me , and thank you for using fixya ,
have a great day ,
Adham Said
SOURCE: 1991 Caprice No reverse. Moves in neutral. All forward gears OK.
What engine? Rear wheel drive ?Sounds like shift linkage or cable out of adjustment slightly. Have a look at where cable or rod attaches to transmission for adjustment. If not sure of what your looking for get back to me with info.
SOURCE: My Mazda 626 Wont go into Drive
Sounds like you have lost the transmission. There are bands that clamp down to lock the transmission into the gear you want. They are controlled by a hydrolic unit located in the trans. The first thing I would do is have a shop pull the trans oil pan and see if it is full of chips of metal. If so you definately have a problem. At the same time they can look at the bands and see if one of them is broken. another cause would be that metal has gotten into the hydrolic valve body and frozen the drive band portion so it will not function. You may also get lucky and have it be an internal adjustment of the drive band. Good Luck, RAC
SOURCE: 1995 Chevy S10 Blazer will not go into park.
theres a shift cable if its floor model,linkage for column model.
SOURCE: My 2001 F150 Ford Harley Truck won't go into
under the vehicle there is a shift rod with a nut on it loosen the nut and move selector on tranny to park then line lever in truck up with it and tighten nut.
Testimonial: "Thank you for answering my question so quickly. I have spent hours looking for help and it only took you a matter of minutes."
718 views
Usually answered in minutes!
×