I need the serpentine belt routing diagram for a 1990 Chevrolet Silverado 1500 pickup truck. It is a 305 cc or 5 liter engine, 2-wheel drive with AC and has PS.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Pop the hood of the car and locate the serpentine belt routing diagram. The diagram on the 2003 Chevrolet
Impala is on top of the fan shroud. The diagram will be a picture of
all of the accessory pulleys and how the serpentine belt is routed among
the pulleys. This diagram will give you the exact direction for routing
the new belt onto the pulleys. If you cannot find a serpentine belt
routing diagram, take a notepad and pen and draw out the exact routing
diagram of the old belt across the pulleys.
2
Locate the serpentine belt tensioner. It is located below the alternator
on the left front side of the engine. The tensioner on the 3.4 liter,
3.5 liter and the 3.9 liter engines will require a 3/8 ratchet to
release the belt tensioner. The 3.8 liter engine will require a ratchet
and a 15 mm socket for the belt tensioner. Rotate the belt tensioner
clockwise to loosen and remove the belt from the belt tensioner pulley.
3
Slide the old belt from the belt
tensioner pulley. Remove the belt from the remaining pulleys and pull
the belt from the engine compartment.
4
Route the new belt across the
crankshaft pulley first. The crankshaft pulley is the big pulley on the
bottom of the engine in the center. Then route the serpentine belt
across the remaining pulleys as directed by the serpentine belt routing
diagram. Leave the belt tensioner pulley for last.
5
Rotate the belt tensioner
clockwise again to relieve the tension and slide the new belt across the
top of the belt tensioner pulley. Release the belt tensioner and the
belt will tighten up as the tensioner applies pressure to the belt. Make
sure the new belt is properly seated in all the pulleys.
6
Crank the engine and inspect the belt again to make sure that it stays seated in the pulleys.
under the hood is a sticker - or better yet - take the vin to the dealer - they will give you a free print out or even email or fax it to you. Best of it.
Click on the following free direct Link. It has several Diagrams including the correct Serpentine Diagram for your 2001 Dodge Ram 1500 2WD Pickup with the 3.9L V6 Engine with the various Engine Options (AC/No AC, etc.).
Let me know if this helped, or if you have additional information questions. Feel Free to contact me at FixYa.com!
Helllo there: Simply click on the links that i have provided and the routing diagram will be there ok
2001 - 2001
CHEVROLET CAVALIER - L4 2.2L 134ci CNG FI N 5
Belts / Tensioners / Pulleys
Part Number
Description
5050630 Belt Routing Diagram
Multiple Accessory, w/o A.C.
5050888 Belt Routing Diagram
Multiple Accessory, w/A.C.
You should have a drive belt diagram under the hood somewhere above the radiator, fan shroud or possibly on the bottom side of the hood near the latch.
I could'nt find a diagram for your particular vehicle.
Hope this helps.
Regards,
×