SOURCE: brake lights do not work, all other lights work.
Have you checked the brake light switch thats activated by the brake pedal arm?if not follow the brake pedal arm up under the dash and you will find a switch that goes on and off when you push the arm in and out.Make sure you have power in and out and the switch is correctly adjusted.
SOURCE: obd 2 connector does not work with any code scanner
Glad you got it , hope it didn't take too long to run down the orange wire .
Thanks for using FIX YA !
J5
SOURCE: 2000 Cavalier catalytic converter was stolen/check engine light
The check engine light is probably indicating a catalytic converter malfunction the Oxygen sensor that is located after the cat tells the computer if the cat is functioning properly it is possible the wire has been broken or damaged. To see if the cat is there jack up the car and look under the passenger and driver area of the car follow the exhaust pipe from the front back the first thing the pipe comes to should be the cat it looks like a muffler with a wire going to a sensor after toward the back side of it, I doubt they never installed one but I guess it is possible.
SOURCE: 2003 Chevy Impala transmission
my 03 impala only jerks hard when the engine is cold or slightly cold. when its warm its fine. i never had it looked at before.
SOURCE: Brakes Lights dont work on a 2006 Chevy Silverado
I've worked on these the first drove me crazy. its the turn signal switch every thing runs thru these. head lights, turn signal, brakes. except the third brake light. it runs directly from the brake switch. go figuare
83 views
Usually answered in minutes!
×