At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I have a !996 C.V. with Police Package and it is a blown fuse in the 5 slot found under the dash........I had this happen frequently and it also causes my turn signals to stop working too. Make sure to use a 15amp fuse.....Hope this helped
did you buy the heater cores new heater core and radiator is two different things sounds like you thermostat is bad touch your bottom hose and your top are they both hot if ones hot and ones cold water is not circulating bad thermostat is the heater core put in right
Blend door actuator. When it fails for some reason it turns to the hot side and gets stuck. Dash must come out. I usually do it in 3 hours, because I've done it numerous times.
they radiator flush has created a blockage in the heater core that creates the heat. you dont want to replace this part because it can get $$$$. i would take it back to the shop and have them try the service again( at no charge) to see if it can remove the block
×